Card Kits - RAE

Hi Hun,

Here are the cards in all their glory with details.. 

Note:

These are a guide only, you can switch the details around to suit your self.. 

Card bases are the actual card.

Mats are the layers of papers behind the embellishments.

Panel is the front piece under the embellishments.

Cardboard (CB) is scraps of boxes etc behind the mats or panels.

Cardstock is the solid piece of colour paper.

Embossed mats or panels have been embossed with an embossing folder. 

Also included a sheet of sentiments for you to cut up to use on these ..

Card 1. 

Place cardboard behind the embossed mat and adhere to card base. Glue strip of paper on the front and then place double sided foam tape on the tag and adhere as shown,  Put the same on the hearts and place on the tag as well as the bow and sentiment.

Card 2.

Adhere CS to the embossed mat and then to the card base.

Ink around the edges of the 6 strips and the flower.. add the strips to the card with foam tape.

Make the flower up as shown with the gauze in-between the flower petals and shape petal with your fingers.. adhere to the card front as shown.

Card 3.

Glue the three pieces of the white frame together to give a little dimension.. Glue that to the patterned paper and adhere that to the card base. Make up the flower as above and place on the yellow piece of cardstock.

Card 4.

Adhere CS to the embossed mat and then to the card base.

Ink around the edges on the flags and strips adhere as shown overlapping some. 

Card 5.

Ink around all the pieces of the papers. Make the belly band using the Velcro dot to adhere at the back.

Card 5a

Adhere all the papers as shown here then using your own stamps stamp any images you wanton the papers.. If giving as a gift place a white piece of cardstock on one of the full panels in the middle to write on .

Card 6.

Blend ink over the card front and ink snowflakes or something like that on the front using light ink.. Colour the cats, hat, sleigh and presents in with watercolours inks/ paints lightly.. adhere all items with 3d foam tape.

Card 7.

Basically as above.. Place the wreath over the gate and the flower on top of that.

Card 8.

I sent a photo with this one and outline the tiny pieces you need to glue on as well.. adhere the yellow of the fireplace to the actual back of the fireplace and just use a little colour for the flames. I added 3D foam tape to the present, wreath and bell also the stockings..

Card 9.

A simple easel card. Stamp the flower and leaves with a light coloured ink and ink around the edges. fussy cut around the ornament.

Card 9a.

Glue the two pieces together writing to writing and only on the section shown.

Card 9b.

Adhere the mats then the embossed panels. Add 3D foam tape to the ornament.

Card 9c.

The back of the card opened.

Card 9d.

The inside of the card opened.

Card 10.

Adhere the scalloped mat on the card base. Tilt the pattern paper and adhere as well. Place 3D foam tape on the frame and adhere at an angle as shown. (you can if you like keep them all straight, your option). Adhere the other items using 3D foam tape.

Card 11.

Adhere the mat to the card base then the embossed panel. Again do the same to the strips and adhere to the embossed panel as shown.  Glue the butterflies only in the middle (their bodies) and push up the wings. Do the same to the acetate butterflies (you will need to hold this down for a minute until the glue holds). then place bling on the bodies to cover up the glue. 

Card 12. 

I'm not sure if this was a panel or straight on the card? If a panel adhere with cardboard to the card base. I used a paint brush and watered ink (distress ink is good for this) any ink will do though. Put ink on to a craft mat or glass , put a little water to make a light puddle and paint the flowers & leaves. You can do the tree and branches if you like.. Place 3D foam tape on the birds, house and basket. Fussy cut the eggs and place on top of the the stamped image.  Colour the little hearts in on the house.

Card 13.

I think I sent a embossed panel? If so, you will need to cut it off at the top under the strip of paper if you want the saying on top of the card.. Adhere the patterned paper to the strip and adhere it to the card front. Place the hearts on the base hearts and then using 3D foam tape glue to the card as shown using the string if wanted as an embellishment.. Add bling along the bottom left on the strip.. 

Card 14.

I know this is a simple card but I love it.. Ink around the edges , place cardboard on the back of the mat and adhere to the card base. Place 3D foam tape on the banner and stick down as shown.. You can place bling in the centre of the flowers if wanted. I placed dots of glitter on all the petals of the flowers though it does not show in the photo. It is quite pretty.

Card 15.

Place the embossed panel on the base card. place the strip of white flowers on to the strip of cardstock. Using 3D foam tape place the strip on to the card front. Adhere the flowers to the panel only in the middle of the flower and pull up the petals to give it some dimension. Adhere the little strip on top and the word and butterfly as shown. (though if I was you I would place the word straight not like mine which I nearly tore off lol). 

Card 16.

Adhere the panel to the card base using cardboard. Adhere the black outline of hearts to the card front. using a drop of glue adhere the hearts where you would like. Add the butterflies and a bling. I used liquid pearl and made little dots around the hearts. I couldn't do this for you as it depends on where you put your heart outline. 

Card 17.

Do the same as above.

Card 18.

My favourite card. Adhere the holey panel to the card front and place some red dots in where you like. Adhere the strip across the top of the holey strip. Adhere the white cardstock on top of the red cardstock. Place 3D foam tape on the front panel and glue on top of the white a shown.

Card 19.

Adhere the white embossed panel on the card base using cardboard. Make your flower up and ink the edges. shape the petals with your fingers or a ball tool. Adhere your sentiment using 3D foam tape.  

Card 20.

I gave you the one colour for the holes in this card because I had accidently dropped the bag in the rubbish bin that had all the other parts in it and lost it all. I made up a card with just the one colour but gave it away and it was pretty as.. My hubby preferred the one colour. Place the embossed panel on the card base using cardboard. glue the holes frame on the card front and glue the bits in. (warning make sure you do this card on a white piece of copy paper so you dont lose your bits). Place the sentiment on the front using 3D foam tape. 

Card 21.

Adhere the coloured pattern to the back of the lattice. Adhere that to the card base with cardboard. Make up your flower and place on as shown.  (wish you were over this way I could get you to do all your own backgrounds).

Card 22.

Adhere the embossed panel to the card base using cardboard. Place the tree and presents on the panel with 3D foam tape. Glue the little ginger bread men on the tree after the white snow dries.. Snow is simply texture paste dabbed on with a palette knife.   

Card 23.

Adhere the card stock to the card base and then the embossed panel (you might have to trim this down a little ). Put your elf together using the white elf as the base. fussy cut different sections of the other elves and place on the white elf. I used a little eyeshadow as blush for his cheek. Put your presents together with glue and then add 3D foam tape to the presents and the elf and place on the card front 

as shown. I couldn't add this sentiment as someone lost it when I did a class. ( or took it).

Card 24.

Simple but effective, Adhere the panel to the card base using cardboard but not on the hole. 

Match it up to HB2U. Glue the dots around the hole and use dimensional magic on top of them to give the card some shine.

Card 25.

Adhere the embossed panel to the card base using cardboard. Adhere the strips and decorate as shown in the photo. Place 3D foam tape on the sentiment.

Card 26.

Adhere the embossed panel on the card base. Using 3D foam tape or cardboard adhere the frame on the embossed panel. (make sure both are straight). Colour in the gnomes (paper is a mixed media paper so will hold any medium). Adhere to the embossed panel with 3D foam tape. adhere the pom pom and place glitter on it. I used lots of glitter and dimensional magic on these though it does not show up on the photo.    

Card 27.

Adhere the cardstock to the card base. Glue the pattern paper to the back of the negative cut out and Adhere the panel to the card base using cardboard. Add the butterflies where you like. ( if you choose you can adhere the pattern paper to the cardstock then add the card front with cardboard to give a different dimension. ). Ink around the butterflies.

Card 28.

Adhere the strip to the card base using cardboard. Add the rest of the embellishments as shown.

Card 29.

Ink the pattern paper and adhere to the card base using cardboard. Adhere the flourish, Make up your flower inking the edges and shaping with a ball tool or your fingers.. Adhere the heart with 3 D foam tape. 

Card 30.

Adhere the panel to the card base using cardboard. Ink around the embellishments and Adhere the large circle, the top small circle and the heart with 3D foam tape. Adhere the small back circle with glue as shown. Simple design but I love it.. I would next time move the heart down a fraction.

Card 31.

Adhere the panel to the card base using cardboard. Adhere the butterflies in the body only to the panel. Add bling.

Card 32.

Here is a link on how to make this card babe.  Pyramid Card

Join the card as shown .

I hope you like these hun

Hugs

Donna xx